What do variable voltage e-cigs bring to the vaper?
Simply put – they give you more control on the amount of vapor (allowing you to increase or decrease) created by your tank. This in turn affects the throat hit you experience which is done by changing the amount of power (wattage) generated by your Tank.
Some people prefer to change the amount of vapor for different flavours.
Chocolate, tobacco, and coffee flavours are noted by some to taste better when exposed to more power, while fruit flavours such as apple, strawberry or peach often taste best with less power.
Some people simply prefer more vapor and the stronger throat hit at different times and like to change according to their mood or circumstances.
The downside of Variable Voltage E-Cigs is that the tank kits invariably cost a lot more than standard Starter Kits and can run into hundreds of pounds with some kits costing more than £200. However top end kits can cost a lot less – at Matchless there are two very high quality kits coming in at £70 for the VV1 kit and £60 for the VV2 kit.
Don’t however assume that Variable voltage kits will necessarily give you a better experience.
If you aren’t a heavy smoker, or if you smoke low tar cigarettes, you may find the amount of vapour production / throat hit of a variable voltage device too much at higher power levels and not to your liking.
If you have to turn a variable voltage e-cig down to 3.7 volts or lower ( the voltage of most standard kits ) to give you the vapour levels you prefer you would probably be best to stick with your standard kit.
In addition using variable voltage / wattage E-cigs is not necessarily straight forward (particularly if you are new to vaping). There is more to vaping than just simply pressing a button, and a lot of people underestimate how tricky using some devices can be.
For example, when using an E-cig at 5 volts + , an atomiser can give you a harsh / dry vapour with an unpleasant flavour if the heating coil in the tank is not kept wet.
The best results with the Variable Voltage units are generally achieved by the more experienced E-cig users.
Some of the geek speek relating to Variable Voltage E-Cigarettes you#ll come across are:
- Volt – unit of electrical potential or motive force, potential is required to send one ampere of current through one ohm of resistance.
- Ohm – unit of resistance, one ohm is the resistance offered to the passage of one ampere when impelled by one volt.
- Ampere – units of current, one ampere is the current which one volt can send through a resistance of one ohm
- Watt – unit of electrical energy or power, one watt is the product of one ampere and one volt – one ampere of current flowing under the force of one volt gives one watt of energy
Power (P) or (W), = Watts,
Voltage (V) or (E), = Volts,
Current or Amperage (I), = Amps (Amperes),
Resistance (R) = Ohms.
Power is usually abbreviated by (W) and measured in Watts. The formula generally given for Power is:
W = V x I or W = I2 x R or W = V2 / R.
Simply put – if you increase your voltage you increase your power. and the main feature of variable voltage e-cigs are the ability to adjust the power and therefore the strength
read more